PS21765 Ipm Intelligent Power Module 20A 600V DIP-IPM Small Motor Control

PS21765 Intelligent Power Module Power Module 20A 600V DIP-IPM Small Motor Control
Applications
► Refrigerators
► Air Conditioners
► Small Servo Motors
►£ Small Motor Control
Specifications
PS21765
Intellimod™ Module
Dual-In-Line Intelligent Power Module
20 Amperes/600 Volts
Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272
Rev. 07/07
Absolute Maximum Ratings, Tj = 25°C unless otherwise specified
Characteristics Symbol PS21765 Units
Power Device Junction Temperature* Tj -20 to 150 °C
Storage Temperature Tstg -40 to 125 °C
Case Operating Temperature (Note 1) TC -20 to 100 °C
Mounting Torque, M3 Mounting Screws — 8.7 in-lb
Module Weight (Typical) — 20 Grams
Heatsink Flatness (Note 2) — -50 to 100 μm
Self-protection Supply Voltage Limit (Short Circuit Protection Capability)** VCC(prot.) 400 Volts
Isolation Voltage, AC 1 minute, 60Hz Sinusoidal, Connection Pins to Heatsink Plate VISO 2500 Volts
*The maximum junction temperature rating of the power chips integrated within the DIP-IPM is 150°C (@TC ≤ 100°C).
**VD = 13.5 ~ 16.5V, Inverter Part, Tj = 125°C, Non-repetitive, Less than 2μs
IGBT Inverter Sector
Collector-Emitter Voltage VCES 600 Volts
Each Collector Current, ± (TC = 25°C) IC 20 Amperes
Each Peak Collector Current, ± (TC = 25°C, Less than 1ms) ICP 40 Amperes
Supply Voltage (Applied between P-NU, NV, NW) VCC 450 Volts
Supply Voltage, Surge (Applied between P-NU, NV, NW) VCC(surge) 500 Volts
Collector Dissipation (TC = 25°C, per 1 Chip) PC 76.9 Watts
Control Sector
Supply Voltage (Applied between VP1-VNC, VN1-VNC) VD 20 Volts
Supply Voltage (Applied between VUFB-UUFS, VVFB-VVFS, VWFB-WWFS) VDB 20 Volts
Input Voltage (Applied between UP, VP, WP-VNC, UN, VN, WN-VNC) VIN -0.5 ~ VD+0.5 Volts
Fault Output Supply Voltage (Applied between FO-VNC) VFO -0.5 ~ VD+0.5 Volts
Fault Output Current (Sink Current at FO Terminal) IFO 1 mA
Current Sensing Input Voltage (Applied between CIN-VNC) VSC -0.5 ~ VD+0.5 Volts
Description
DIP-IPMs are intelligent power modules that integrate power devices, drivers, and protection
circuitry in an ultra compact dual-in-line transfer-mold package for use in driving small three
phase motors. Use of 5th generation IGBTs, DIP packaging, and application specif ic HVICs
allow the designer to reduce inverter size and overall design time.

Features
► Compact Packages
► Single Power Supply
► Integrated HVICs
► Direct Connection to CPU
► Reduced Rth
Shopping Guide