Shenzhen Retechip Electronics Co., Ltd
Professional quality, beyond value.
Add to Cart
STM32F429IGT6 Mcu Micro Controller Unit Ic Mcu 32bit 1MB Flash 176lqfp
Specifications
| Product Attribute | Attribute Value |
|---|---|
| STMicroelectronics | |
| Product Category: | ARM Microcontrollers - MCU |
| SMD/SMT | |
| LQFP-176 | |
| ARM Cortex M4 | |
| 1 MB | |
| 32 bit | |
| 12 bit | |
| 180 MHz | |
| 140 I/O | |
| 260 kB | |
| 1.7 V | |
| 3.6 V | |
| - 40 C | |
| + 85 C | |
| Tray | |
| Analog Supply Voltage: | 1.7 V to 3.6 V |
| DAC Resolution: | 12 bit |
| Data RAM Type: | SRAM |
| Interface Type: | CAN, I2C, SAI, SPI, UART/USART, USB |
| Moisture Sensitive: | Yes |
| Number of ADC Channels: | 24 Channel |
| Number of Timers/Counters: | 14 Timer |
| Product: | MCU+FPU |
| Program Memory Type: | Flash |
| Watchdog Timers: | Watchdog Timer |
| Unit Weight: | 0.067010 oz |
Description
The STM32F427xx and STM32F429xx devices are based on the high-performance Arm® Cortex®-M4 32-bit RISC core operating at a frequency of up to 180 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all Arm® singleprecision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.
The STM32F427xx and STM32F429xx devices incorporate high-speed embedded memories (Flash memory up to 2 Mbyte, up to 256 Kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.
All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers. They also feature standard and advanced communication interfaces.
• Up to three I2Cs
• Six SPIs, two I2Ss full duplex. To achieve audio class accuracy, the I2S peripherals can be clocked via a dedicated internal audio PLL or via an external clock to allow synchronization.
• Four USARTs plus four UARTs
• An USB OTG full-speed and a USB OTG high-speed with full-speed capability (with the ULPI),
• Two CANs
• One SAI serial audio interface
• An SDIO/MMC interface
• Ethernet and camera interface
• LCD-TFT display controller
• Chrom-ART Accelerator™.
Features
• Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 180 MHz, MPU, 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
• Memories – Up to 2 MB of Flash memory organized into two banks allowing read-while-write – Up to 256+4 KB of SRAM including 64-KB of CCM (core coupled memory) data RAM – Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, Compact Flash/NOR/NAND memories
• LCD parallel interface, 8080/6800 modes
• LCD-TFT controller with fully programmable resolution (total width up to 4096 pixels, total height up to 2048 lines and pixel clock up to 83 MHz)
• Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D)
• Clock, reset and supply management – 1.7 V to 3.6 V application supply and I/Os – POR, PDR, PVD and BOR – 4-to-26 MHz crystal oscillator – Internal 16 MHz factory-trimmed RC (1% accuracy) – 32 kHz oscillator for RTC with calibration – Internal 32 kHz RC with calibration
• Low power – Sleep, Stop and Standby modes – VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM
• 3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode
• 2×12-bit D/A converters
• General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
• Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 180 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
Applications
These features make the STM32F427xx and STM32F429xx microcontrollers suitable for a wide range of applications: • Motor drive and application control
• Medical equipment
• Industrial applications: PLC, inverters, circuit breakers
• Printers, and scanners
• Alarm systems, video intercom, and HVAC
• Home audio appliances
Frequently Asked Questions
Shipping:
1, We can shipping all over the world by DHL, UPS, FEdex, TNT and EMS.The packaging is very
safe and strong. Please nitfy me you have any special needs
2, It will take around 3-5 days to reach your hands.
Product Type & condition:
Because of the fluctuant sales situation. the stock parts are always changing and the stock list cannot
be, promptly updated.So please consult the stock situation when you inquire.
Buyer Reading:
1. Please confirm receipt of products if the items you received,and if the goods was damaged please
contact us immediately. send the photo to us that we can check and give you best solution
2. We only guarantee delivery in time but we couldn't control the express delivery time. Our related
sales person will be responsible to send the AWB for the delivered goods in the next workday.
you can check the AWB in the website which we send to you. For the AWByou also can call to the
local branch of the express company in your company.
Pre-sales service :
1. Our team design and make solutions based on different requirements from different customers.
2. We provide 24-hours service,and every message you quote inquiry will be replied within12 hours
on different requirements from different customers.
2. We provide 24-hours service,and every message you quote inquiry will be replied within 12 hours